The Prevelo Zulu Three packs high performance mountain bike features into a 20-inch wheel size package. Every component is the real deal and is carefully chosen to provide the best performance and fit for young riders ready to tear up the trails. It features:
- Prevelo confidence inspiring low and narrow geometry. Prevelo geometry keeps the rider low, balanced and in control.
- Zulu specific slack head tube angle and short chain stays keeps the bike controlled over rough terrain.
- Lightweight aluminium frame with custom formed 6061 triple- butted tubing and TRAPT™ downtube profile.
- Stealth dropper post ready.
- Available with tubeless ready wheels and tires.
- Rear hub with 12mm Thru-Axle.
- Radius front and rear hydraulic disc brakes.
- SRAM GX 10-speed drivetrain. This 10-speed derailleur has a short cage. Because of the small wheel diameter on 20-in bikes, rear derailleurs on 20-inch bikes hang low and close to the ground. The Prevelo Zulu Three uses a high performance short cage derailleurs to keep things high and away from the ground. The derailleur also features a clutch that can be turned on with the flip of a switch to eliminate derailleur bounce over hard terrain and reduce chain drops.
- 11-36T wide span gearing gives riders plenty of range to spin up tough hills.
- Kid engineered direct mount cranks. All Prevelo cranks are sized specifically for each model bike, down to the millimetre.
- 95% assembled. Just install the handlebar, seatpost, front wheel, and pedals.
|Weight (with pedals and tubes)
|22.96 lbs / 10.41 kg
|Minimum Saddle Height
|22.8 in / 580 mm
|Maximum Saddle Height
|725 mm / 28.5 in
|Bottom Bracket Height
|9.8 in / 248 mm
|1.88 – 6.16
|Standover (ground to top of top tube)
|21.5″ / 564.1mm
|A Wheel Size
|35.1 in / 892 mm
|C Effective Top Tube Length
|17.4 in / 443 mm
|D Head Angle
|E Seat Tube Angle
|F Chain Stay Length
|13.38 in / 340 mm
|Gloss Gobbledygook Grey
|99M Series heat treated aluminium alloy custom formed & multi-butted tubing
|Spinner 300 20 AIR – 80mm travel – Ø30mm Stanchion – lockout and adjustable compression
|Aluminium alloy with quick release
|Radius hydraulic with 160mm rotor
|Radius hydraulic with 140mm rotor
|SRAM GX Trigger
|HEIR direct mount cold forged – 120 mm crank arm length
|30T alloy narrow-wide stamped
|Sealed cartridge – hollow axle
|1.1/8″ threadless with sealed cartridge bearings
|Aluminium 28-hole Double Wall
|Lightweight alloy 1-piece forged CNC with QR skewer
|Lightweight alloy 1-piece forged CNC with thru-axle
|Tire & Tube
|Kenda Small Block 8 Pro 20 x 2.1
|Prevelo big kid saddle
|Prevelo aluminium large bore – 600mm width x 40mm rise with 31.8mm to 22mm taper
|Forged aluminium 35mm extension – 7° rise
|HEIR Kraton rubber lock-on